• Leading manufacturer of rubber v belt, cogged belt, timing belt and conveyor belt.
81hwmc8ymrl. Sl1500 副本
Bx46 Cogged V Belt Type Bx Outside Length 49 In And 21 32 In Width
Bx46 Cogged V Belt Type Bx Outside Length 49 In And 21 32 In Width (1)

Raw Edge Cogged V-Belts

Raw edge cogged V Belts, also called cut edge belts, cut belts or cogged belts. Raw edge belts are in three basic designs, they are Raw Edge Plain(REP), Raw Edge Laminated(REL) and Raw Edge Cogged(REC). They are highly flexible, that the cogs providing lower slip design to increase efficiency by increasing the coefficient of friction.

Category:

Description

Advantages:
Much higher durability and flexibility due to the cogs
Excellent in resistance against heat, oil and wear
High antistatic properties conforming to ISO1813
Particularly resistant to environmental influences like heat, ozone, sunlight and effects of the weather
Very low stretch due to use of length stable polyester cords.
Higher power rating of upto 30% over wrapped V-Belts
Energy loss reduced to absolute minimum
Low Slip due to better arc of contact and pulley to belt geometrical relationship
Temperature range: -18℃ to +100℃
Maximum recommended belt speed is 30 m/s

Type Top Width
mm		 Height
mm		 Angle
Degree
ZX 10 6 40
AX 13 8 40
BX 17 11 40
CX 22 14 40
DX 32 19 40
XPZ 10 8 40
XPA 13 10 40
XPB 16 13 40
XPC 22 18 40
3VX(9N) 9.5 8 40
5VX(15N) 16 13.5 40
8VX(25N) 25.4 23 40

Reference Standards:
IS 2494, BS 3790, ISO 4184
RMA IP-22
RMA IP-23

Applications: Used in the engines of automobiles, trucks, buses and construction machinery, eg. fans, compressors, drives, pumps

Note:
Intermediate sizes are available upon request
Aramid cord construction belts are available upon request