• Leading manufacturer of rubber v belt, cogged belt, timing belt and conveyor belt.
Qq20230916 220336@2x
Flexbelts Beschn Format 1

PU Flex Timing Belts

PU Flex timing belt is manufactured to the customer’s length specification as an endless belt without any breaks in the tensile reinforcement. This means that two spirally wound tension cords are used. These can be made of steel, highly flexible steel, or stainless steel to suit a wide range of applications.

Category:

Description

PU Flex Timing Belts are manufactured in thermoplastic polyurethane, with continuous spiral steel cords. This type of belt is developed for good running characteristics and high traction loads. They are especially suited for power transmission and conveying with high loads and high speeds(up to 10,000RPM) The addition of a nylon coating on the teeth during production enhances the running properties for specific applications and reduces the noise frictional coefficient. An extra thickness of special coating is also possible on the back of the belt offering extra protection against aggressive or heavy products.

Advantages

  • The length range can be manufactured according to gradations in pitch.
  • Option of polyamide fabric on the tooth side
  • Available with S or Z cord twist

Properties

  • Direct welding on of cams and cleats
  • Manufactured widths: 100 and 150 mm

Profile
T5; T10; T20
DT5; DT10
AT5; AT10; AT20
DAT5; DAT10
5M; 8M; 14M
D5M; D8M
H

Dimensions：
Lengths of 1,100 to 24,000 mm,
depending on the profile