Description
Advantages of MingSen Textile Industrial Timing Belts：
1. There is no slippage during operation and an accurate transmission ratio. Although the polyurethane synchronous belt is an elastomer, the load-bearing rope does not elongate under the action of tension, so the belt pitch can be kept unchanged. The belt and gear tooth grooves can be meshed correctly to achieve slip-free synchronous transmission and obtain a precise transmission ratio.
2. High transmission efficiency and good energy-saving effect. The polyurethane synchronous belt is used for non-slip synchronous transmission and has a relatively high performance.
High transmission efficiency, up to 0.98. Compared with V-belt transmission, it has obvious energy-saving effect and can obtain higher economic benefits.
3. The transmission ratio is large and the structure is compact. The transmission ratio of synchronous section transmission can generally reach about 10, and in the case of a large transmission ratio, its structure is more compact than V-belt transmission. Because the synchronous belt drive is a meshing drive, its pulley diameter is much smaller than the V-belt pulley which relies on friction to transmit power. In addition, the synchronous belt does not require large tension, so the size of the pulley shaft and bearings can be reduced.
Small.
4. Easy maintenance and low operating costs. Because the load-bearing rope in the polyurethane synchronous belt has a very high elongation rate. It is made of small fiberglass, steel wire, and other materials, so the belt length is very small during operation, and there is no need to adjust the tension frequently like V-belts, chains, etc.
5. Polyurethane synchronous belt has high corrosion resistance and heat resistance. It can still work normally under high temperatures and corrosive gas conditions.